4G LTE-A Pro CAT12 Outdoor CPE
4G LTE-A Pro CAT12 Outdoor CPE
4G LTE-A Pro CAT12 Outdoor CPE
- Detail
- Parameters
- Review
JT8500D/H is the LTE-A Pro CAT12 outdoor data unit specially designed to meet the high speed wireless backhaul and fixed wireless access deployments by the 4G service operators. JT8500D/H can
provide Gigabit PoE connection to connect user terminal device such as indoor router or Wi-Fi APproducts, They are used for the customer's home or office to provide alarger wireless range and enhance mobility of usage.
JT8500D/HMTBF time is expected to be above 80,000 hours, It can provideup to 600Mbps maxthroughput over the air. The typical coverage should be more than 15kmwith reasonable good throughput performance.
Radio Access | 3GPP Release 12, Category 12 |
Operation Mode | TDD 8Rx/4Rx, 2Tx, DL 4*4 MIMO |
CA | DL 2CA (4x4 MIMO 64 QAM); DL 4CA (2x2 MIMO 256QAM); UL 2CA(64QAM); |
MIMO | DL 2x2 MIMO (4CA); DL 4x4 MIMO(2CA); UL 2x2 MIMO; |
Output Power | 23dBm per Tx |
Frequency Band | B42/43 3400-3800MHz |
Antenna Gain | 13dBi (4 antenna model JT8500D) 17dBi (2 antenna model JT8500H) |
Network configuration | Support Mobility and Nomadic LTE access mode Band, PLMN, Cell ID, SIM card locking Secure boot and firmware authentication DHCP or Static IP address Assignment Bridge and Router Operation Built-in DHCP Server for LAN Devices IPv4, IPv6 DS-Lite Multiple PDN interface NTP Service |
Data Networking | Support GRE bridge and router operation mode Support L2TPv2 BCP networking Support L2TPv3 networking Security and anti-attack protection for LTE and WiFi access Network access and traffic volume control Rich set of ALGs pass-through support |
Device Management | Standard TR069 and OMA-DM device management HTTPS and SFTP FOTA remote upgrade support Built-in device PING and IPERF support for remote device diagnosis |
QOS | Support |
